1、 Purpose of UV aging test chamber: Suitable for testing and verifying the burst strength of plastic hose assemblies for pneumatic brakes after UV resistance.

2、 Main technical parameters

1. Studio size: 600×1000×600(mm);

2. Temperature range: Room temperature to 70 ℃;

3. Lamp center distance: 70mm;

4. Distance between sample and lamp center: 50 ± 3mm;

5. Test time: adjustable from 1 to 999H;

6. Blackboard temperature testing range: 40 ℃~65 ℃;

7. Light irradiance setting range: 0.35-1.25W/㎡/ nm@340nm Adjustable intensity.

3、 Equipment features:

1. The temperature control system consists of a black standard thermometer, heater, air supply fan, intelligent program regulator and other actuators. It adopts the BTHC temperature control method to blow hot air into the test chamber to stabilize the test temperature inside.

2. The moisture supply system consists of a water tank, a humidification system, etc. Through the mechanism of moisture condensation, the exposed surface of the sample is made to condense and wet, simulating rainwater, High humidity, condensation, and synergistically working with sunlight (UV) and darkness to create a testing environment.